REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz C-Class (from 1993 to 2000, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	C-class
		Introduction
		Maintenance
		Engines
		Lubrication system
		Cooling
		Heating and ventilation
		Ignition system
		Fuel system
			Fuel System Description
				Introduction
				Fuel tank
				Fuel Level Sensor
				Fuel pump
				Fuel filter
				Air filter
				The transverse tube of the air filter
				Intake manifold
				Throttle cable / throttle lever (DB)
				Cable Throttle (DB)
				The contour of the diesel engine fuel
				Preheating diesel
				Fuel thermostat
				Hydraulic valve housing
				Throttle cable / throttle lever (DD)
				Cable Throttle (DD)
			PETROL INJECTION
			The injection system of diesel engines and power
			EXHAUST
			Transmission
			Manual and automatic gearbox
		Chassis
		Steering
		Brakes
		Body
		Electrical

printable version

Hydraulic valve housing

Below are the order of works on the diesel engine.

Withdrawal

PERFORMANCE ORDER

1. Loosen the air hose clamp (90/1).

2. Remove the vacuum hose (100a) with the mechanism of membrane vacuum ignition advance hydraulic valve (100).

3. Unhook connecting rod (200) on the hydraulic valves.

4. Remove the two screws (60/2) and slide to the side valve exhaust gas recirculation system (60).

5. Remove the three screws (105/1).

6. Pull the hydraulic valve body (105a) of the transverse pipe of the air filter.

Setting

PERFORMANCE ORDER

1. Check for damaged O-ring profile, replace it if necessary.

2. Push the transverse pipe of the air filter housing hydraulic valve with O-ring profile. To do this, loosen the screws of the transverse pipe of the air filter, and then retighten.

3. Screw the hydraulic valve body.

4. Screw the valve EGR system.

5. Attach the connecting rod in the hydraulic valve.

6. Push the vacuum hose.

7. Push the air hose and fix its collar.

« previos page
Fuel thermostat

next page »
Throttle cable / throttle lever (DD)