printable version
Crankshaft pulley - removal and installation
1. Disconnect the battery from weight. 2. Remove the heatsink cover.
| 15.4 clearance check meshed gears (1), the gap between the driven gear and the pump housing (2), the axial play (3) and the deformation plane of the housing (4) |
| 16.6 Removing the crankshaft pulley |
3. Remove the bottom front cover. 4. Remove the seat. 5. Remove the pulley bolt, including the transfer or Zafy-ksirovav flywheel (in the a / m with automatic transmission). 6. Remove the pulley with special tool (see photo). 7. Install in the reverse order. Lubricate pulley bore oil for the engine. All the bolts are tightened to specified torque.
|