printable version
Engine support - replacement
1. Periodically check the condition of the engine mounts, presence on them of cracks and bundles. 2. If necessary, replace bearings release the nuts and bolts of support to the engine mounting and the body on both sides (see photo).
| 23.2 Screws and nuts supports |
| 23.4 Engine Supports Z24i |
3. Carefully hang out the engine of the eye (to access them you will need to remove the air filter) and a little lift to provide access to the supports. When lifting watch carefully for hoses, cables and wires. 4. Remove the nuts and bolts of support, drawing attention to! orientation of rubber pillows of support (see photo). 5. Install bearing in reverse order.
|