printable version
Roller rocker arms - disassembly and reassembly
1. Remove any screws except for the two screws at both ends. 2. Hold the roller, carefully remove the two outer screws, giving straighten springs. 3. Remove the rocker and mark so that at assemblage to establish on former places. 4. Replace the rollers if they have signs of wear.
| Orientation 6.5a roller rocker arm during assembly (engine Z24) 1.Pazy 2. punching 3. Roller exhaust valves 4. Roller intake valves 5. By the front of the engine |
| 6.5b marks on the brackets and rollers on the cylinder head 1 to the front of the engine 2. The marks on the bracket 3. The marks on the cylinder head |
| 6.5v Orientation brackets during assembly of rollers with a yoke (motor K24J 1,2. 3. Cut the part of the intake valve 4. On the part of the exhaust valves |
| 7.6 Unscrewing the camshaft sprocket bolt |
| 7.12 Before installation grease a neck of a cam |
5. Install the platen in the front bracket, align the holes and insert screws. On the roll of the intake valves are provided grooves. When reassembling, set the rollers so that punching at their ends are turned upwards. Brackets set focusing on labels (see photo). 6. Put the rocker, compress the spring and install the rear brackets, insert the bolts. Set the rollers and the cover in reverse order.
|