 printable version
Removal and installation of glass doors
Fasteners and glass front door bracket
1 - sealing glass;
2 - the front door;
3 - lower inner seal glass;
4 - a bolt, 20 Nm;
5 - an arm of the door. Windows
It is part of the door bracket; | 6 - the engine window;
7 - a bolt, 10 Nm;
8 - the plug;
9 - Screw, 8 Nm;
10 - mechanical windows;
11 - Glass doors |
Withdrawal
| PERFORMANCE ORDER | | 1. Remove the interior door trim. |  | 2. Remove the cap technology (1), covering the holes in the inner part of the door (2 - a bolt). | | 3. Lower the door glass as to allow access to the bolts fastening the glass. | | 4. Loosen the screw (2) and loosen the clamps that secure the glass to the window. |  | 5. Lift the back of the glass and simultaneously turning it, remove the glass out of the window opening of the door. |
|
Setting | PERFORMANCE ORDER | | 1. In the sequence, return to removal, install the glass in the door and lock it in place. This locks should be placed at the level of technological holes. |  | 2. Move the glass (3) back, slide it in and lock the bolt (2) by tightening it to 10 Nm (1 - screw the bracket door, 4 - bolt mounting clamp glass). | | 3. Install the plug technology. | | 4. Install the interior door trim. |
|
|
