 printable version
Removal and installation of the external handle of the door opening
The external handle of opening of a door and door lock
1 - lock the door;
2 - pull the lock release;
3 - the support surface;
4 - support bracket;
5 - the screw; | 6 - external handle of opening of a door with a support;
7 - pad;
8 - the case of the lock cylinder;
9 - a support;
10 - a bolt |
Withdrawal
| PERFORMANCE ORDER | | 1. Remove the front door lock cylinder. |  | 2. Release the clip (1) of the handle (2) door opening (3 - door lock lever). | | 3. Slightly moving the external handle of opening the door, remove it from the door. |
|
DIFFERENCES in the rear doors
| PERFORMANCE ORDER |  | 1. Remove the seal (1) in the area of the rear door handles (2) of the rear door (3 - a casing, 4 - screwdriver for unscrewing mounting bolts). | | 2. Open the rear door handles (arrow) and hold it in this position. | | 3. Through a hole in the end of the door unscrew a bolt with internal shaped deepening 4 mm until it stops. Thus freed mount housing. |
A warning  Do not remove the bolt completely, as otherwise the locking ring will drop support on the door.
| | 4. Remove the cover (3) and handle (2) opening the back door. |
|
Setting
| PERFORMANCE ORDER | | 1. If necessary, moving to the sides, set the door outside handle to the door opening. | | | 2. Squeeze the handle (2) opening the door to the door and, having passed the clip (1) into the groove of the door, attach it to the handle of the door opening (3 - door lock lever). | | 3. When installing the lock (1) do not move the lock lever (3). | | 4. Replace the door lock cylinder housing. |
|
|
