Removal and installation of the lock cylinder housing
Withdrawal
PERFORMANCE ORDER
1. Open the front door and remove the protective cap (3) with screws located near the front door lock cylinder (1 - the bolt of the lock cylinder, 2 - lock bolts).
2. Pull the handle of the door opening of the door and lock it in this position.
3. Prior to unscrew the lock bolt (3) securing the cylinder (2) of the door lock (1 - the handle of the door opening, A - 4 mm wrench). As a result, the housing of the lock cylinder is unscrewed.
A warning
Not completely unscrew the bolt, since otherwise the locking ring may fall on the door.
4. On the right side of the handle to open the door, remove the door lock cylinder body with a cylinder lock.
Setting
Installation is made in sequence, return to removal.