printable version

General information on options and adjustments

Under "Settings" in this manual is meant not individual adjustment procedure any of the parameters of the car's systems, and a whole range of regulations that will ensure the maximum efficiency of return of the engine.

If the owner of a new car after its purchase strictly adhere to the schedule of routine maintenance (see. Section routine maintenance schedule), often carried out checks critical parameters to maintain the required level of lubricating fluids, the engine rarely will require the implementation of additional maintenance and reconditioning (above replacement subject to increased wear of components and consumables).

On the other hand, in the case of neglect to perform regular maintenance procedures and frequent violations of the deadlines of the checks, the effectiveness of return of the engine sooner or later fall. Particularly high probability of such a situation, in case of purchase of used cars. In such cases there is a need to perform complex configuration of the power unit in excess of the amount of work for the current maintenance of the car.

The first step in configuring or troubleshooting working with low-impact engine always check the compression pressure in the cylinders (see chap. Engine), which allows the analysis of the results to assess the overall state of the internal components of the power unit and to plan future regulation and / or restoration work. For example, if the compression pressure check revealed signs of a serious internal engine wear, the usual set of settings will not be enough to remedy the situation and his conduct will be a waste of time and money. In view of the value of the information obtained as a result of the compression pressure check, its implementation should be entrusted with enough experienced and qualified mechanics equipped with adequate diagnostic devices.

The following lists the basic setup procedures to maximize the effectiveness of the impact of in proper mechanical condition of the engine.

• At each refueling, check the level of the motor oil, brake fluid, coolant and washer fluid glass;
• Not less than once a month, check the inflation pressure of tires and the engine coolant level in its expansion tank;
• It is advisable once a season (for example, every spring and autumn), check the fluid level and the power steering ATF.