- Switch off the ignition and disconnect the wire from the battery.
- Remove the decorative cover of the engine.
- Carefully remove the wires from the terminals BB spark plugs.
 | Pull the cord is not, but for a tip. Before disconnecting, turn the little tips for easing the gasket. If necessary, disconnect the terminals BB the coil. |
 | - Compressed air - you can use a bicycle pump - blow candle niches, then remove the spark plug spark plug wrench, without tilting it.
|
- Assess the spark plug wires and explosives (see chap. Systems of an electric motor). If necessary, replace the wiring and correct possible problems, which can be seen as suppositories.
- Screw in new spark plugs and tighten them with demanded effort (25 ÷ 30 Nm), then connect the wiring explosives tightly (lock) planted on the shank tips.
- Install decorative engine cover.
|
|
