REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sportage (1999 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sportage
		Introduction
		Controls and operation receptions
		Current care and maintenance
			general information
			General information on options and adjustments
			The routine maintenance schedule
			Checking the oil level
			Checking the condition of tires and pressure of their rating, the rotation of the wheels
			Replacing the motor oil and oil filter
			Changing the transmission oil Manual transmission
			Replacing the grease transfer case and differentials
			Greasing of locks and hinges
			Checking the status of anther drive shafts
			Lubrication universal joints, drive shafts
			Checking the brake system components
			Check the functioning of the cooling system and frost coolant fluid replacement
			Replacement of a filtering element of an air cleaner
			Replacing spark plugs
			Replacing the glow plug
			Check and belt force accessory drive
			Check the condition and reliability of fastening components chassis, suspension and steering gear
			Checking the components of the exhaust system
			Check and replacement of hoses of an impellent compartment, localization of leaks
			Check the power supply system, replacement of the fuel filter
			Check idle speed
			Replacement ATF
			Check of serviceability of functioning of the valve PCV (petrol models)
			Checking the wiring explosives (petrol models)
			Check and replacement of the timing belt
			Check the air conditioning system
			Check and replace wiper blades
			Checking the status of the battery, care it and gymnastics
		Engine
		System of cooling, heating, ventilation and air conditioning
		The power supply system, motor control / emission control and exhaust
		Systems of an electric motor
		A five-speed manual gearbox gear
		Automatic Transmission
		Transmission Line
		Brakes
		Suspension and steering
		Body
		Onboard electric
		The control body dimensions
		Wiring

printable version

Replacing the glow plug

PERFORMANCE ORDER

Warm up the engine to normal operating temperature.

Reversing candles should be made only after the engine is fully warmed up!

Remove the engine cover.
Disconnect the electrical wiring from the underlying Remove the spark plugs.
Compressed air - you can use a bicycle pump - blow out a candle niche.
Remove the spark plug.
Installation is in the reverse order. Tightening torque glow of 14.7 ÷ 19.6 Nm.

« previos page
Replacing spark plugs

next page »
Check and belt force accessory drive