1. Disconnect the negative wire from the battery.  | If installed on the car stereo is equipped with a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action! |
2. Support the chock rear wheels of the car, cock a lay brake.
3. Loosen the nuts of the right front wheel. Poddomkratte the front of the car and establish it on props and remove the right front wheel.
4. Remove the protection crankcase and locker protect the arch of the right front wheel.
5. Remove the drive belts (see chap. Adjustment and routine maintenance).
6. Remove the front timing cover the crankshaft position sensor (see chap. Engine management).  | 7. By blocking Shiv crankshaft against rotation by means of a chain or strap wrench, give the central bolt of its fastening. |
8. Having hooked a pulley on both sides of a large screwdriver or pry bar, carefully remove it from the shaft journal. If necessary, use 3ahvatnym stripper. | Crank stripper captures only a portion of the hub of the pulley! |
9. Install in the reverse order. Before planting the pulley on the shaft journal track correctness of combination keys with a return groove. The fixing bolts are tightened with demanded effort. | 
