printable version
Exhaust Manifold and installation -snyatie
1. Disconnect the air ejection tube, remove the valve body (if present). 2. Disconnect the channel connecting the manifold and air filter. 3. Remove the heat shield. 4. Remove recirculation tubes (photo). 5. Lift the front of the car and establish on supports. 6. Remove the front exhaust pipe. 7. Disconnect the spark from the exhaust manifold. 8. Remove the nuts and bolts of the collector.
| 11.4 Tubes ejection of air (left) and recycling (right) on the exhaust manifold of the engine Z24i |
| 12.13a sequence loosening cylinder head bolts on engines Z24 |
| 12.13b sequence loosening cylinder head bolts on engines K24 |
| 13.2 The cylinder head of the engine K24 1 Roller rocker arms and valve rockers 2. The cylinder head 3. Laying 4. Bolt 5. Camshaft 6. Saddle 7. Guides 8. Supporting disk 9. The valve stem seal 10. Crackers 11. Plate 12. Intake |
9. Remove the manifold. 10. Clean the collector of the consolidation rests. 11. Install the cylinder head a new gasket. Hand tighten the bolts and nuts. 12. 3-4 receptions tighten bolts and nuts to the specified torque. Tighten from the center to the periphery in a crisscross pattern. 13. Other operations are performed in reverse order. 20. Warm up the engine and check the tightness of the compounds of the collector.
|