1. Unlike the conventional steering, fitted in hydraulic rack gear used hydraulic fluid, which begins with the passage of time need to be replaced.  | 2. Hydraulic fluid reservoir steering pump is located on the inside panel mudguard arches right front wheel, ie, on the right front corner of the engine compartment, just in front of the upper strut. |
3. To check the hydraulic fluid you need to install the front wheels in the straight-ahead position and stop the engine.
4. The walls of the tank PAS on all models are made of a translucent material that allows you to check the fluid level without removing the cover. Make sure that the liquid level was kept between the upper and lower marks on the walls of the tank. In addition, the tank filler cap is equipped with a dipstick.
5. If necessary, the liquid filled in the tank through the neck, with the aid of the funnel. Use only the recommended hydraulic fluid grade.  | In order to avoid getting dirt into the hydraulic system before removing the cover, wipe the surface of the tank surrounding it with a clean cloth. |
6. If you need to adjust the liquid level occurs regularly and often, check for signs of leakage steering pump Rack and pinion housing, as well as all the connecting lines of a hydraulic path of PAS and their couplings. |
