1. Fuel filter using spring-type clamp is secured to the engine compartment near the bulkhead assembly GTZ with the vacuum brake booster.
2. Relieve the pressure in the supply system (see chap. The power supply system and release), then disconnect the negative cable from the battery.  | If installed on the car stereo is equipped with a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action! |
 | 3. Release the filter fixing spring clip and disconnect the inlet and outlet gasoline pipe lines.
A - clamp fastening of a final fuel hose
In - the fuel filter assembly
C - The spring clamp |
4. Pay attention to the labeling of nodes connected to the filter inlet and outlet fuel pipe. Correctly set the filter should be deployed outlet fitting top.
5. Connect the assembly of the intake and exhaust gasoline pipe, having tracked reliability of a tightening of fixing collars. Connect the negative cable to the battery, start the engine and check the filter and gasoline pipe lines for signs of fuel leakage. | 
