| Considered in this manual car models are equipped with additional safety (SRS). Before proceeding with any work near the airbag unit, steering column and instrument panel, disconnect SRS to avoid injury at its casual operation. Wiring of chain SRS is easy for distinguishing on yellow color of isolation. |
1. The circuit indicators and alarms to use the general breaker. 2. The correct functioning of the circuit breaker is confirmed clearly audible rhythmic clacking. Failure of one of the indicator lamps leads to the cessation of operation of the breaker. When one of the indicators of the breaker operating frequency is doubled, informing the driver to perform lamp replacement. 3. The simultaneous failure of both direction with a high degree of probability indicates failure of the corresponding fuse. It is also possible failure of the breaker itself or stalk. Check the condition of electrical contact connections corresponding chain. When knocking out the fuse, check the wiring for signs of a short circuit.
| 4. To replace the breaker disconnect the wiring assembly and release of the support bracket, located under the dashboard, to the right of the steering column. |
5. Make sure the replacement breaker in its standard size corresponded to the failed. 6. Installation is the reverse order. |