| Halogen type lamp bulb filled with pressurized gas and the sudden shaking may explode. Try to take such lamps only for base and wear protective goggles. Remember that when you touch the bulb with bare fingers on the glass remain grease stains, which leads to premature lamp failure due to overheating. Before installing the lamp bulb, wipe with alcohol.
|
| 1. Open the hood. Locate the lamp assembly on the rear side of the casing head block headlights. When replacing the lamp unit, right headlight, remove the plastic shield. |
2. Disconnect the wiring and remove the lock ring.
| M |
| 3. Remove the lamp assembly from the cartridge casing from the headlight. |
4. Trying not to touch the bulb, release the bulb from the socket and install in its place a replacement. Load the assembly into the housing block lights and lock the retaining ring. 5. Connect the wiring. Check the operation of the headlights. Close the hood. |