1. Cock a lay brake and prop chock rear wheels. Loosen the nuts of the front wheels. Poddomkratte the front of the car and establish it on props. Remove the wheels. 2. Remove the anti-roll bar on both control levers suspension. 3. Remove collars bearing bushes anti-roll bar. 4. Remove the stabilizer bar assembly. 5. After removing the rods to remove her Stirrup assembly and carefully check the condition of rubber plugs. In case of signs of deterioration of the material, replace defective components. 6. Installation is the reverse order. Make sure that the sleeve turned deployed cuts forward, and all fixture has been tightened with demanded effort. |